Dark Gray Printing PVC Wall Panels With Golden Lines For Trinidad
Dark Gray Printing
|250mm||2.5 per sqm|
each 10pieces will be put into one bag
PVC panel is a alternative product which attains the beauty and
elegance of modern architectural design and at the same time being
cost effective, eco-friendly.
PVC panels come in different colors that provide a very modern,
clean and appealing appearance. Due to the nature of PVC it is very
durable and easy to keep clean and is relatively unaffected by:
- Insect Infestation
PVC Wall Panels offer the following advantages:
|PVC panels do not expand, contract or warp when they come into contact with
water, so they will be a good wall and ceiling choice for bathroom.|
|PVC panels can be taken to any plastic recycling facility.|
During the process of installing pvc panels, we can save a lot of
labor cost, because pvc panel is easy to install, we can fit them by ourselves to avoid installation costs. The prices of pvc
panels are very economical even when compared to the other
alternatives available in the market and apart from this deliver
many other advantages.
Its closed, smooth surface means that it is extremely easy to clean
using gentle household detergent dissolved in water. This also
means that the product is virtually dirt resistance because there
are no pores, which can be filled with dirt.
5. Simple and quick to fit
PVC panel is a very easy product to install. Can be stapled,
nailed, screwed or glued. The sides fit exactly into each other to
create an unbelievable flush joint. Also available are strips and
corners with slots to hold the panels perfectly.
How to choose PVC Panel?
The surface should be even and beautiful. Color and pattern should
be in harmony with where to decoration. Panels with bright and
single color and clean pattern are better for ceiling usage.
B. Checking the tongue and groove
The cut of panel looks like honey comb. It should be clear and
sharp. Tongue and groove is on the two sides of nished panels. When
install the tongue into the groove, no gap is allowed, and the
surface should be even as one complete panel. If installing is not
easy, the panels are surely of poor quality.
PVC Panel Installation
1. Clean the surface of ceiling.
2. Nail wooden or steel battens(20mm - 30mm thick) into the wall
and ceiling, with all the corners firstly, then on the plane with
the distance of 400mm away between every wooden batten.
3. Screw PVC profiles(cornices) on all the corners, then insert the
panel into the corner profiles, then the folling panel into the
4. Screw PVC second panel's notch side into the wooden or steel
battens, then insert the third panel, then the fourth, and nail the
fourth's notch side, then fifth and sixth, then...
5. Attention for the distance and notch side panel: for the ways
above is based on 250mm or 300mm wide panels, and wooden or steel
battens between distance is 400mm, so every 2 panel, screw the
second notch. Surely you could change the ways as per your
situation presently, by way of changing the distance of the panels
and the wooden or stell battens.